Version: V1 and V2
The drivers that come standard with the SoundBlaster Audigy 2 ZS are out of date. The following is a link that will take you to a website where you can download a new driver. After you download and install the drivers, you will most likely still have to adjust your hardware acceleration levels. To do this, go into the Windows Control Panel | Sounds and Audio Devices and click on the “Audio” tab. In the section on Sound Playback, click on “Advanced”, and then click on “Performance”. In the section on Hardware Acceleration, move the slider down from the “Full” setting. Start by moving the slider to “None” and apply, then restart FS One and test the setting. If it does not sound correct, move the slider up one notch and repeat the process until you find the correct setting.