Too real to be a game!™ 

Why do I get a USB interface error message when I start the FS One?

Versions: V1 and V2

Before starting FS One, plug the FS One USB Interface into the computer.

Also, if you are running with a JR/Spektrum or Futaba transmitter, do not turn on the transmitter switch when you use FS One. Leave the transmitter in the “OFF” position, and the transmitter will turn on when you connect the FS One Adapter cable.

With Hitec and Airtronics, you must turn the transmitter “ON”.

Check your transmitter instruction guide to confirm these recommendations.

 Share on Facebook Share on Twitter Share on Reddit Share on LinkedIn