FS One V2 - System Requirements FAQ

The minimum system requirements are:
Operating System: Microsoft Windows 7/Vista/XP
Processor: 1.8 GHz Intel Pentium IV, or AMD Athlon XP 2500
Memory: 512 MB RAM
Hard Disk: 4 GB space availaible
Video/Graphics: NVIDIA or ATI graphics card with 64 MB RAM
    NVIDIA: GeForce4 Ti, GeForce 5000-series (5200 or better)
    ATI: Radeon 9000-series (9200 or better)
    Intel: GMA4500 integrated graphics
USB port
DVD drive (for install)

The recommended system requirements are:
Operating System: Microsoft Windows 7/Vista/XP
Processor: 2.8 GHz Intel Pentium IV or better, or AMD Athlon x2 3200 or better
Memory: 1 GB RAM or more for Windows XP; 2 GB RAM or more for Windows 7/Vista
Hard Disk: 4 GB space availaible
Video/Graphics: NVIDIA or ATI graphics card with at least 128 MB RAM
    NVIDIA: GeForce 6000-series (6600 or above), 7000-series, or better
    ATI: Radeon X-series (X600 or better)
USB port
DVD drive (for install)

FS One V2 comes with your choice of Adapter Cables for use with your favorite transmitter or the original TacCon controller from FS One V1.

FS One V2 does not require online activation. You don't enter a serial number when you install, and the software does not "phone home" to InertiaSoft. If you sell it, the new owner just installs and flies - pretty simple.

Yes. FS One works on Windows XP/Vista/7, either 32-bit or 64-bit.

Yes. FS One current runs with Windows 8 Preview.

Yes. To use the TacCon controller with FS One V2, the V2 TacCon Cable is required.

If are purchasing V2, choose "FS One V2 with TacCon Cable" here »

If you already have V2, choose "TacCon Adapter Cable for V2" here »

Almost anything that you've seen an ad for in the past ten years, from major and minor manufacturers (and, of course, V1's TacCon Controller, and many USB joysticks and gamepads). It must have a standard trainer port. Pick the Adapter Cable that matches your transmitter trainer port when you purchase FS One.

Q: Will my buddy box work?

At least 4 (two control sticks). FS One V2 will use up to 8 channels if your transmitter supports it. FS One auto-detects how many you have.

Yes. You must already have an FS One V2 USB Interface to use the extra Adapter Cables. Order extra cables here »

To upgrade from V1 to V2, order V2 online »

We usually ship same day if ordered before 4:00 pm (CST).

Use your own transmitter (or the V1 TacCon controller) with V2's new 1024/2048 USB Interface.

If you are moving from V1 to V2, claim your $30 Upgrade Rebate or $20 Competitive Rebate.
For details, see next item below.

V2 installs separately from V1, so you can keep using V1 if you like.