FS One® - Online Store - Precision RC Flight Simulator Cart Contents
0 item(s)
Subtotal: $0.00

    
Shop Online
FS One V2 Extra Adapter Cables for V2 2nd-Player Interface for V2
Simulator
Search the Store
 
Use keywords to find the product you are looking for.
Advanced Search
Information
Additional Options

FS One V2 - 2048 Firmware Update

FS One V2 ships with 1024 resolution. To update your interface to the higher 2048 resolution, you need to update your version of FS One V2 and also update the firmware on your interface. "Firmware" is the software inside the USB Interface. These instructions take you through the firmware update. It is easy and takes only a few minutes.

To read about the important advantages to 2048 resolution, click here »

2048 Update Instructions

  • Step 1: Your version of FS One V2 must be version 2.0.4 or later. The latest version of FS One V2 is: 2.0.9 (r1170) . To download and install this latest update, click here »
  • Step 2: Download and save to your desktop the USB Interface Firmware Updater. There are two versions. The first one is recommended and described further below:
    1. User interface version (recommended): FirmwareUpdaterUI-2048.exe
    2. Command line version (quickest way): FirmwareUpdaterCMD-2048.exe
  • Step 3: Shutdown FS One V2 if you are running it. Close all other applications.
  • Step 4: Disconnect your FS One V2 USB interface. Then reconnect your FS One V2 USB Interface to your computer and wait for the USB connection sound (i.e. for it to register on your system).
  • Step 5: Run the Firmware Updater program (double-click on it from the desktop). Follow the onscreen prompts (see below). When the interface is detected, click 'Update' and wait for the program to indicate that the update was successful. Depending on your system, the process could take a few minutes to finish.
    • If the yellow LED light is flashing twice per second, the firmware installed successfully. If this is not happening, then download and run the command line version (item 2 above).
  • Step 6 (optional): After following all the steps, you can confirm the update by running the Game Controllers app from the Windows Control Panel. The new name will be "FS One v2 2048".
  • Step 7: Start FS One V2. It will automatically show the new interface name "FS One v2 2048". Before flying, calibrate your controller.
  • Note: If you reinstall FS One V2 from the original 2.0 DVD, you must download and install the latest FS One V2 update (ver 2.0.9 (r1170) ) so that FS One "sees" the 2048-resolution interface firmware. To download the latest update, click here »